ANTI-SPAM!  

Many S2000 owners favor the look of the clear corner headlamp assemblies provided stock for S2000s in Japan and Europe but don’t want to pay the near-$1,000 cost for a set of the JDM or EDM headlamps to replace their stock US amber corner lamps. To save money, some have converted the stock amber-corner US headlamp assemblies, which requires melting the sealant that holds the assemblies together, removing the amber diffusers, then resealing the units. The results, many agree, look a bit amateurish. The turn signal reflector and bulb are exposed, and the assembly looks unfinished.

For as long as owners have been doing the clear-corner conversion, people have been looking for a reasonably-priced set of clear lenses to replace the amber plastic lenses that cover the exposed reflectors and bulbs. Many people have been deterred from doing the conversion themselves because they don't like the look of the exposed reflector and bulb, even though the do-it-yourself conversion saves a cost of well over $800 for the JDM or EDM clear corner headlamp assemblies (which have a clear lens with a different pattern). Also, there is a risk that improper reassembly of the lamps will permit moisture to condense inside, ruining their appearance.

With the help of several other S2000 owners, Rick’s can finally offer an inexpensive solution. First, we are now offering clear diffusers for the US lamp assemblies (diffuser installation instructions). Our clear diffusers have the same pattern as the stock amber diffusers and fit the lamp assembly perfectly. The diffusers are offered in two colors clear or gray tinted, and the JDM (Japanese Domestic Market) pattern. The JDM pattern duplicates the diffusers sold in Japan and the rest of the world.

A pair of our diffusers in either color, ready to install, is just $95 + shipping.

For those who don't want to take the trouble and risk of taking apart the headlamp assemblies themselves, Rick's is also offering a special conversion option. For only $225 (including the cost of the clear diffusers), your stock amber-corner headlamp assembly can be converted to clear corners by an experienced S2000 owner. This requires that you remove the assemblies and ship them to our Headlight Clearing Specialist, where the conversion will be done and the assemblies shipped back to you in about 48 hours. The lamps are guaranteed to be free of defects and leaks for three months and any defects in the conversion will be repaired free of charge.

To order the conversion, follow these steps:

1. Select the conversion option. When you place the order, your card will be billed only for the cost of the diffusers ($100) as a deposit.
2. Once your order is processed, you will be contacted via e-mail by our Headlight Clearing Specialist with detailed shipping instructions.
3. Ship them at your expense, to the address supplied by our Headlight Clearing Specialist.
4. We convert them, and ship back.
5. Once the conversion is completed and the headlamps have been shipped back to you, the balance ($125) plus return shipping will be billed to your card.

Important!

When you ship your headlamp assemblies, insure the shipment for $800.00. This will cover the replacement cost of the headlamp assemblies. You are required to remove the HID bulbs and ballast prior to shipping. This will reduce shipping cost, and these parts are not required as part of the clearing process and can only get and/or cause damage during shipping.

Wingman's Turn signal Bulb Mod! (pdf format)

In stock

Diffusers Purchase $95
Conversion Option $225

SpeedFilm Clear Headlight Protection

If you’re like most S2000 owners, you probably worry about stone chips marring or even cracking your stock $1,000 headlamp assemblies. If you’ve bought the JDM or EDM assemblies, or converted your diffusers to clear, you’ve got even more reasons to worry about damage to your headlamps.

Now there’s an inexpensive way to protect your headlamps and gain peace of mind: SpeedFilm headlight protection.

SpeedFilm headlight protection is a clear film that covers the polycarbonate lens with a 3M® engineered urethane film. This protective film is softer then the polycarbonate lens itself, so as sand and small rocks hit your headlight, they bounce off.

The SpeedFilm headlight protection system consists of a 9 mil urethane film cut to the exact dimensions of the S2000 headlight lens. This protective film gives you complete protection for your $1000 HID headlights.

What makes SpeedFilm special? Some other makes of headlamp protective film use vinyl that is 40 0r 80mm thick. We do not believe that vinyl of this thickness is a good choice for light protection. The S2000 HID headlights generate extreme heat, and the 40 mil and 80 mil films retain more heat, which is the suspected source of polycarbonate "crazing" (small micro cracks) reported by a number of owners who have installed other brands.

We believe a film no thicker than 15 mil is ideal for providing very good protection while minimizing heat retention.

Installation of the SpeedFilm is simple. First clean your headlights thoroughly with soap and water and dry them completely. Next mix 1 part rubbing alcohol to 9 parts water in a spray bottle, then mist the headlights completely with the alcohol solution. Then peel the backing from the SpeedFilm protective film and placed the film on the headlight, slipping it around until it is centered. Finally, using a rubber squeegee and working from the center, press the film in place.

Pictures? We would be happy to show you a pictures of these installed, but when installed properly, there is nothing to see. They will in no way alter the beam pattern of your lights or harm your lamp housing. In fact, if your headlamps have small scratches or nicks, the film will cover them up. Your headlamp assemblies will look new with SpeedFilm protecting them.

SpeedFilm is a manufacturer of premium transparent auto bras for the most discriminating of enthusiasts. They use urethane films by 3M and Venture (Venture is the ONLY Ferrari approved US manufacturer).

SpeedFilm Headlight Protection $40
(+Shipping)

Rick's Signature Accessories is not in any way associated with the Honda Motor Corporation American Honda Motor Co, Inc., Honda North America or any other divisions, subsidiaries, or organizations related to Honda ("AHM"). Products offered for sale by Rick's Signature Accessories have not been endorsed, approved, sponsored, licensed or in any other way reviewed or recognized by AHM. This web site and the products offered herein are not intended to suggest any association with AHM nor to represent Rick's Signature Accessories as an authorized Honda dealer.

The photographs of S2000 automobiles on this web site have been taken provided by owners of the S2000 for use on this site and are not intended to suggest any association with AHM or to represent Rick's Signature Accessories as an authorized Honda dealer.

Enjoy Secure Credit Card ordering Online!